Medical Isolation Power Supply System
Medical IT system insulation monitoring device and fault location system is suitable for hospital operating room, ICU (CCU) and other important places, and can provide a safe place for such continuous, reliable power solutions.
![1](http://www.acrel.vn/uploads/140.png)
1)Primary connection diagram and field distribution display
![2](http://www.acrel.vn/uploads/225.png)
![3](http://www.acrel.vn/uploads/314.png)
2)Real-time data acquisition and display
![4](http://www.acrel.vn/uploads/43.jpeg)
3)Fault Alarm
![5](http://www.acrel.vn/uploads/53.jpeg)
4)Remote parameter setting and inquiry
![6](http://www.acrel.vn/uploads/63.jpeg)
5)Graphic display
Display the insulation status, load status, and the isolation transformer temperature of each set of isolated power systems in graph form.
1)AITR Series Medical isolation transformer
![7](http://www.acrel.vn/uploads/714.png)
•Isolating transformers for medical IT systems
•Double insulation treatment, Electrostatic shielding layer
•PT100 temperature sensor
•Rated power: 3.15…10KVA
•CE mark
2)AIM-M10 Medical Intelligent Insulation Monitor
![8](http://www.acrel.vn/uploads/814.png)
• Insulation monitoring for medical IT systems
• Load and temperature monitoring of isolation transformer
• Device disconnection monitoring
• LED indicators: On, Insulation, Overload, Overtemp
• Alarm relay output
• Test button
• RS485,MODBUS-RTU
3)AIM-M100 Medical Intelligent Insulation Monitor
![9](http://www.acrel.vn/uploads/91.jpeg)
•Insulation monitoring for medical IT systems
•Load and temperature monitoring of isolation transformer
•Device disconnection monitoring
•LED indicators: On, Insulation, Overload, Overtemp
•Alarm relay output
•Test button
•RS485,MODBUS-RTU
4)AIM-M200 Medical Intelligent Insulation Monitor
![10](http://www.acrel.vn/uploads/1011.png)
•Insulation monitoring for medical IT systems
•Load and temperature monitoring of isolation transformer
•Device disconnection monitoring
•LED indicators: On, Insulation, Overload, Overtemp
•Alarm relay output
•Test button
•Insulation fault location
•RS485 (MODBUS-RTU) + CAN (custom protocol)
5)AID10 Alarm and Display Instrument
![11](http://www.acrel.vn/uploads/113.jpeg)
•Remote monitoring
•LED indicators:On, Insulation, Overload, Overtemp
•Mute button
•Test button
•Power supply: DC24V
•RS485,MODBUS-RTU
6)AID120 Alarm and Display Instrument
![12](http://www.acrel.vn/uploads/1212.png)
•Remote monitoring
•LED indicators:On, Insulation, Overload, Overtemp
•Mute button
•Test button
•Power supply: DC24V
•RS485,MODBUS-RTU
7)AID150 Alarm and Display Instrument
![13](http://www.acrel.vn/uploads/133.jpeg)
•Remote monitoring
•LED indicators:On, Insulation, Overload, Overtemp
•Mute button
•Test button
•Power supply: DC24V
•RS485,MODBUS-RTU
8)ACLP10-24 DC Power Supply
![14](http://www.acrel.vn/uploads/149.png)
•Power Supply to AID series
•AC 220V input, DC 24V output
•Completely Isolated Linear Transformer
•Power-on indicator
9)ASG150 Signal Generator
![15](http://www.acrel.vn/uploads/152.jpeg)
•Generating Fault Location Signal
•Detection of L1 and L2 disconnection
•LED indicators: On, Comm, L1, L2, Fault
•CAN bus, custom protocol
•Power supply: DC24V
10)AIL150-4/-8 Insulation Fault Locator
![16](http://www.acrel.vn/uploads/167.png)
![17](http://www.acrel.vn/uploads/177.png)
•Insulation fault location in AC IT systems
•AIL150-4: 4 measuring channels
•AIL150-8: 4 measuring channels
•LED indicators: On, Comm, L1…L8
•CAN bus, custom protocol
•Power supply: DC24V
1)Four-piece set
![18](http://www.acrel.vn/uploads/184.png)
2)Five-piece set
![19](http://www.acrel.vn/uploads/196.png)
3)Seven-piece set
![20](http://www.acrel.vn/uploads/204.png)
![f9725a374d4c058ab3f9d172c98c346](http://www.acrel.vn/uploads/f9725a374d4c058ab3f9d172c98c346.jpg)
![23](http://www.acrel.vn/uploads/231.jpg)