DIN Rail Energy Meter, ADL200
DIN Rail Energy Meter, ADL200
ADL200 DIN rail energy meter is mainly used for measuring single phase active energy in low voltage systems, as well as other electrical quantities including voltage, current, power, etc. RS485 communication function is configurable, providing users with a convenient solution for energy monitoring, data logging and energy management.
Measurement of kWh: kWh , Kvarh (positive and negative)
Measurement of electrical parameters: U、I、P、Q、S、PF、Hz
LCD Display: 8 digits
Frequency: 45-65Hz
Pulse output: kWh
PIN/Terminal Overview of ADL200
Power Wiring: 1-phase 2-wire via direct connect
Communication Wiring: RS485 wired Communication with IoT Gateway
Function
| Measurement of kWh | kWh (positive and negative) |
| kvarh (positive and negative) | |
| Measurement of electrical parameters | U、I、P、Q、S、PF、Hz |
| LCD Display | 8 digits |
| Key | 3 keys |
| LED alarm | voltage loss and over voltage |
| Pulse output | kWh |
| Communication | RS485, MODBUS-RTU,Infrared |
Electric performance
| Voltage | Reference voltage | AC 220V |
| Reference frequency | 50Hz | |
| Power consumption | <10VA | |
| Current | Basic current | 10A |
| Maximum current | 80A | |
| Consumption | <4VA | |
| Energy accuracy | Accuracy measuring | 1 class |
| Clock | accuracy | ≤0.5s/d |
| Active pulse | Pulse width | 80±20ms |
| Pulse constant | 1000imp/kWh | |
| Communication | Interface | RS485 |
| Protocol | MODBUS-RTU |
Working Environment
| Temperature | Working | -25℃~55℃ |
| Storing | -40℃~70℃ | |
| Humidity | ≤95%(No condensation) | |
| Altitude | <2000m | |
Write your message here and send it to us
